FREQUENCY TRANSVERTER MAVI K17/K17-A
Presented frequency transverter is used to convert 2.4GHZ to 17GHz free band frequency. There are two versions available:
K17 - model which can be connected to any offset parabolic antenna
K17-A - model with integrated offset parabolic antenna MAVI of diameter 30cm and robust mounting to the mast and cables for connection to router.
GENERAL SPECIFICATION OF FREQUENCY TRANSVERTER K17/K17-A
Model | K17/K17-A |
Operating frequency range |
2 x 2.4-2.6GHz translates to 2 x 17.1-17.3GHz, tx mode 2 x 17.1-17.3GHz translates to 2 x 2.4-2.6GHz, rx mode |
Operating mode |
2 x bi-directional TDD, 2 x automatic switch-over to transmit, for 2T 2R MIMO 802.11n and IEEE 802.11ac devices. |
Max. linear transmit power | 2 x 5dbm (2 x 37dbm EIRP for K17-A) |
Transmitters gain |
2 x 17dbm @2.5GHz translates to: a) 2 x 0 dbm @17.2GHz on feed horn outlet (K17) b) 2 x 32dbm EIRP @17.2GHz while connected to antenna 0.3m (K17-A). |
Receivers gain | 6db +/-1db |
Frequency response flatness | +/-1.5db for 2.4 to 2.6GHz and for 17.1 to 17.3GHz |
Noise figure for receivers | 3.5db +/- 0.5db |
Inputs RF levels for transmitters | 2 x 3dbm to 2 x 20dbm |
Local oscillator frequency | 14.7GHz |
Local oscillator phase noise |
-84dbc/Hz @ 10kHz -110dbc/Hz @ 100kHz -129dbc/Hz @ 1MHz |
Local oscillator stability | 0.5ppm (-30~ 60 degrees Celsius) |
Connectors | 3 x 50 ohm (R1/T1, DC, R2/T2), SMA, female |
Output port |
a) conical horn (feed horn): polarization V-T1/R1, polarization H-T2/R2 (K17) b) antenna 0.3m: polarization V-T1/R1, polarization H-T2/R2 (K17-A) |
Antenna gain for H and V polarization (K17-A) | 32dbi for 17.2GHz, +/-3.7deg (3db) |
Panning performance (K17-A) |
in azimuth: 360 deg in elevation: +/-18 deg |
Wind load (K17-A) | 180km/h |
Mast mounting diameter (K17-A) | 40 - 60mm |
Radiation pattern of horn (K17) | the angle 38.4deg (3db) @17.2GHz ( recommended for all offset parabolic antennas ) |
Conical horn mounting diameter (K17) | 40mm |
Rated voltage | 12-36V |
Power consumption | 6Watts |
Operating temperature | -30 ~ 60 degrees Celsius |
Operating conditions | 100% outdoor weather-prof, IP-67 protection class |
Dimensions |
a) 152mm x 77mm x 40mm (K17) b) 380mm x 380mm x 390mm (K17-A) |
Weight |
a) 0.64kg (K17) b) 2.43 (K17-A) |
Standard WLAN equipment and MiniPci cards do have a RF-power of typical 14 to 20dBm
BLOCK DIAGRAM OF TRANSVERTER K17
DIAGRAM OF RADIATED POWER OF TRANSVERTER K17
BLOCK DIAGRAM OF TRANSVERTER K17-A
LINK DISTANCE OF TRANSVERTER K17-A
* - equipment in delivery with model K17-A
If you are interested in buying our devices, do not hesitate to send us an email with request for quotation.
Contact us: sp7ogn@mavi.net.pl
Copyright (c) Mavi. All Rights Reserved